Introduction to computer repair and maintenance tutorial

Any abnormity in the integrated components of your computer can become harmful to its performance. However, there are some common computer issues that can be addressed at personal level. There are a lot of effective tips for computer repair and maintenance that should be applied to fix the problems for good. In fact, you can fix your computer system on your own by following the top useful computer repair tricks and tips that I am going to introduce below.

I.      Tips For Computer Repair:

Firstly, to learn the tips for computer repair and maintenance, you should start from how to repair the simple errors that your computer may have.

1.      Blue Screen Death:

The first common error that computers usually have is the blue screen error. For this matter, people should:

1.1      Understanding The Blue Screen Of Death:

A harder time will come when your PC refuses to load any data. These data will get access to your PC through loopholes in the operating system or in application software. For fixing your PC and eliminating these programs, you should scan with a proper anti-virus program.

1.2      Registry Errors:

The Windows Registry holds information regarding hardware and software settings on your computer. If a malicious program corrupts the Registry, it may result in a blue screen error. These problems could be fixed either manually, by editing the Registry directly, or with third-party software that can check and repair a corrupted Registry. Always back up the Registry before attempting to edit it.

Moreover, you can learn how to fix computer errors quickly and effectively online or take part in a computer repair training course to fix computer errors by your own.

2.      Computer Freezing:

Your computer may freeze on account of software or hardware problems. Thus, you should find out the exact reason for it to figure out the best way to repair the errors. You should notice whether or not the issue starts when you connect any hardware peripherals, such as a scanner or printer. After that, it might be due to a driver conflict. In case that the matter happened after you assemble a new hard drive, it may be due to the improper power or the too high temperature. Thus, you should follow the steps that I list down here to deal with the matter:

In case that you leave the computer all the time, you could fix the error by unplugging it, then wait a minimum time of 30 seconds, and plug it back in. Just by cutting the computer power off to the motherboard, the hardware in your computer will be able to reset and clear the memory.

2.2      Determining Whether Or Not Your Computer Is Too Hot:

It is necessary for you to take a look inside for the PC temperature. You should notice yourself that all the time you need to open your computer cabinet up, you should shut down the PC and unplug it. If your hair is long, you should tie it back. Then, you need to take any jewelry off that may get in the way. You should also avoid wearing clothes that can produce a lot of static that can cause intermittent and harm the hardware, making it harder to address the errors.

2.3      Opening The Computer Cabinet And Checking The Metal Chassis Temperature:

–      If it is really hot, there will be certainly thermal problems. You should examine the front and rear fans gently and blow out the dust. You should also clean the fans regularly. Before you clean inside the computer, you need to remember to shut down it.

–      If you are having more than a hard drive in the computer, you should avoid installing them right after running each other in the chassis as this can make them easier to get heat failure.

–      Before closing up the case, you should remember to check all the cables to ensure that everything is still plugged in. If you need to reset a stick of memory or video card, you should not apply heavy pressure to the motherboard because this will become damage.

2.4      Click According To A Concrete Order:

Access System Restore At Start>Programs>Accessories>System Tools>System

2.5      Inspecting Your Hard Disk:

Your hard disk is a storehouse of information, so when it gets used for a long duration it might get cluttered and patchy; this slows down the performance of your computer. Hence, use your Windows utility CHKDSK to scan and remove bad sectors on regular basis. It is the best preventive way of maintaining computer health.


Leave a Reply

Your email address will not be published.